Guitar Fretboard Camber and Action in the Context of String Bending

R.M. Mottola

Abstract


A simplified mathematical model of guitar string bends and fretboard geometry was constructed for the purpose of examining the effect of fretboard camber radius on noting out (also called fretting out - buzzing or damping of the note by contact with the next higher fret) during deep string bends. The worst-case action increases required to eliminate noting out during bends of various depths (a major 3rd interval to over a 6th interval) were calculated for fretboards with two different camber radii at the nut (254mm, 406.4mm) using the model, and compared. Action increase differences between these camber radii varied from 0.301mm to 0.485mm depending on depth of bend. Significance of these values cannot be determined, because it is unknown whether this variability is tactilely perceptible by players. The data are presented and discussed in the context of their practical implications for guitar designers, repair people, and players.

Full Text: PDF


Savart Journal

Article Information

  • Article published Aug 30, 2014.
  • This article has been accessed 4613 times since publication.